Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you disassemble the storage compartment in the Audi A3 8p?

Model: Audi A3 8P, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Glove compartment

See other generations:
Video tutorial

The glove compartment of the dashboard is not the only storage compartment in a car, there are also others, for example the one in the central tunnel, next to the handbrake lever. How to remove it, we see in this video guide: Start by unscrewing the rear pin of the tunnel, located under the ashtray to be removed, then proceed to remove the plastic cover of the aforementioned lever, remove the leather boot of the gear lever and unscrew the four pins underneath it. Finally, unscrew the side fixing screws of the tunnel and pull it back forcefully.


Posted on 23 July 2025 by ScegliAuto


Related tutorials

How to Remove the Glove Compartment of an Audi A3
How to Remove the Glove Compartment of an Audi A3
Audi A3 (2003-2013 / 8P, MK 2) Learn how to remove the glove compartment located in the cabin of an Audi A3. Open the glove compartment and pull the side plastic cover using a leve…
How to Remove the Glove Compartment of the Audi A3?
How to Remove the Glove Compartment of the Audi A3?
Audi A3 (2003-2013 / 8P, MK 2) To remove the glove compartment of the Audi A3, loosen the two bolts located just below the compartment. Then, open the compartment to access and rem…
How to disassemble the storage compartment of the Audi A3 8V
Audi A3 (2012-2019 / 8V, MK 3) In this article, we will see how to disassemble the storage compartment of the Audi A3 8V. For this operation, you will need an 8mm socket wrench. Fi…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos