Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the timing chain on the Audi A6 3.0 TDI?

Model: Audi A6 MK 4, C7 - Years 2011-2018
Part: Timing belt

To be able to replace the timing chain of the Audi A6 3.0 TDI, you need to open the hood and access the side of the engine compartment by removing the special plastic cover. In this way, it will be possible to access the sprockets and in particular the chain tensioner, which must be loosened so that the chain tension is reduced. At this point, the part can be removed and replaced with a new spare part. After removal, a new chain must be installed which must be suitably tensioned and covered with the appropriate panel.

Posted on 12 June 2022 by ScegliAuto

Video tutorial

Related tutorials

Professional replacement of the timing chain of an Audi A6 Avant 3.0 TDI.
Professional replacement of the timing chain of an Audi A6 Avant 3.0 TDI.
Audi A6 (2011-2018 / MK 4, C7) The replacement of the timing chain is not a job that can be done in the home garage, we must acknowledge that. It is a long and complex job, requiri…
Audi A6 2.0 TDI timing belt replacement instructions
Audi A6 2.0 TDI timing belt replacement instructions
Audi A6 (2011-2018 / MK 4, C7) In this video tutorial we will see the main instructions that will help us replace the timing belt of an Audi A6 2.0 TDI. First of all, open the car'…
How do you replace the timing chain of the Audi A6?
How do you replace the timing chain of the Audi A6?
Audi A6 (2004-2012 / C6, MK 3) In order to replace the timing chain of the Audi A6 it is necessary to completely disassemble the chain protection panel, loosening all its fixing sc…

Reset Tyre Pressure Light Toyota Yaris 2016

Due to advancements in onboard electronics, many vehicles are equipped with various sensors that monitor several operating parameters, including tyre pressure. Even if the pressure is correct, the warning light may sometimes illuminate on the dashboard. First, check with a gauge that the pressure in all 4 tyres matches the manufacturer's specifications. For the 2016 Toyota Yaris, the values are as follows: Front: 2.2 bar for T-type tyres, 2.3 for H-type, 2.4 for W-type. Rear: 2.2 bar for all tyre types. To reset the pressure light, turn on the ignition with the key, locate the reset button under the steering column. Press it for 3 seconds, and the light will flash 3 times before turning off. Remove the key from the ignition and start the vehicle.

Watch the video!


by ScegliAuto

More videos