Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. A3
    4. : Guide to engine sealing rings

Audi A3 - Video tutorial

Model: Audi A3 MK 2, 8P - Years 2003-2013
Part: Engine
Operation: Guide to engine sealing rings

The sealing rings or gaskets are used to close the spaces in the fixed and moving components, in order to reduce and prevent the leakage of lubricant and, moreover, they do not allow pollutants and noxious agents to enter the machine. They can be defined as vital components for the protection of any type of moving machine or vehicle. They also contribute to guaranteeing constant and reliable performance. In bearings they help prevent lubricants from escaping, while in the other components of the machine they help prevent corrosive humidity and other pollutants, as well as avoiding the mixing of two different agents such as oil and water.


Posted on 4 August 2023 by ScegliAuto

    Frequently Asked Questions

    • A3 2012-2019 - What is the cost of changing the engine on the Audi A3? Read Answer
    • A3 2012-2019 - What problems can the Audi A3 heat exchanger have? Read Answer
    • A3 2020-2027 - Where is the engine speed sensor located on the Audi A3? Read Answer
    • A3 2012-2019 - When does the engine light come on in the Audi A3? Read Answer
    • A3 2003-2013 - What does the engine light indicate on the Audi A3? Read Answer
    • A3 2003-2013 - How much does it cost to change the Audi A3's hydraulic lifters? Read Answer

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos