Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Audi A3 Radio?

Model: Audi A3 MK 2, 8P - Years 2003-2013
Part: Car stereo

To replace the radio in the Audi A3, insert the special keys provided into the four holes located at the corners of the device: once the keys are inserted, use them to extract the radio from its housing, disconnecting the connectors located inside. After removal, connect the new radio to the appropriate connectors: at this point, insert it back into its housing, securing it with the internal clips and ensuring everything functions correctly.

Updated on 8 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Radio from an Audi A3
Removing the Radio from an Audi A3
Audi A3 (2003-2013 / MK 2, 8P) Let’s see how to remove the radio from an Audi A3. Use original or aftermarket metal keys to detach the car radio. Insert the keys into the slots (lo…
Remove Radio from Audi A3
Remove Radio from Audi A3
Audi A3 (2003-2013 / MK 2, 8P) Replace the radio in an Audi A3 if it is damaged. Use the original metal keys to remove the radio. Insert the keys into the spaces under the plastic …
How to Dismantle and Remove the Original Radio on Audi A3
How to Dismantle and Remove the Original Radio on Audi A3
Audi A3 (2003-2013 / MK 2, 8P) How to dismantle and remove the original radio on Audi A3? Follow this guide to perform the disassembly: switch off the radio, then use the original …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos