Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the External Wing Mirror of the Audi A3 8V

Model: Audi A3 8V, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Side mirror

See other generations:
Video tutorial

In this video tutorial, learn how to remove and replace the external wing mirror of the Audi A3 Sportback 8V, third generation. First, open the front door and start by removing the door panel; to do this, unscrew all the fastening screws found on the panel, removing the various covers and plastic caps as shown in the video.

Once the panel is removed, disconnect the electrical connector of the switch panel and the mirror adjustment connector; then unscrew the mirror screws using a socket spanner.


Updated on 31 May 2026 by ScegliAuto


Related tutorials

How to disassemble the external rearview mirror of the Audi A3
How to disassemble the external rearview mirror of the Audi A3
Audi A3 (2012-2019 / 8V, MK 3) The instructions provided in this guide will show us the process of disassembly and replacement of the external rearview mirror of the Audi A3. First…
How to Remove the External Wing Mirror from an Audi A3
How to Remove the External Wing Mirror from an Audi A3
Audi A3 (2012-2019 / 8V, MK 3) Removing the external wing mirror from the Audi A3 is very simple; just follow the instructions in our video tutorial to avoid mistakes. To remove th…
Replacing the external mirror on the Audi A3
Replacing the external mirror on the Audi A3
Audi A3 (1996-2003 / MK 1, 8L) In this video tutorial, you will learn how to remove and replace the external mirror on the Audi A3 by following these simple steps. First, open the …

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos