Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the External Wing Mirror from an Audi A3

Model: Audi A3 8V, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Side mirror

See other generations:
Video tutorial

Removing the external wing mirror from the Audi A3 is very simple; just follow the instructions in our video tutorial to avoid mistakes. To remove the external mirror, first remove the inner door panel.

Then, start by dismantling the handle and proceed by undoing all the Torx screws, finally removing the panel. Once the panel is removed, you can move on to dismantling the mirror by first disconnecting the connectors and then undoing the support screws using a torque spanner.

Finally, completely extract the mirror.


Updated on 30 July 2026 by ScegliAuto


Related tutorials

Replacing the External Wing Mirror of an Audi A3
Replacing the External Wing Mirror of an Audi A3
Audi A3 (2012-2019 / 8V, MK 3) How do you replace the external wing mirror (passenger side) of an Audi A3? Follow these steps. Using a plastic or rubber lever, pry between the peri…
How to Remove the External Wing Mirror of the Audi A3 8V
How to Remove the External Wing Mirror of the Audi A3 8V
Audi A3 (2012-2019 / 8V, MK 3) In this video tutorial, learn how to remove and replace the external wing mirror of the Audi A3 Sportback 8V, third generation. First, open the front…
Replacing the external mirror on the Audi A3
Replacing the external mirror on the Audi A3
Audi A3 (1996-2003 / MK 1, 8L) In this video tutorial, you will learn how to remove and replace the external mirror on the Audi A3 by following these simple steps. First, open the …

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos