Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the fuel pump in the Audi A3?

Model: Audi A3 MK 2, 8P - Years 2003-2013
Part: Fuel pump

In this tutorial we can see how to replace the fuel pump in the Audi A3, very simple operation. We start by opening both rear doors and removing the seat of the sofa, then we open the large circular cap placed on the side on the right side of the same. Subsequently, we disconnect both the power connector and the two fuel pipes by unlocking the relative clips and unscrew the external ring nut, using the special extractor or with a large screwdriver and a hammer. Once this is done, we take out the old pump and mount the replacement following the reverse procedure.

Posted on 5 July 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the fuel pump in the Audi A3?
How to replace the fuel pump in the Audi A3?
Audi A3 (1996-2003 / 8L, MK 1) Replacing the fuel pump in the Audi A3 is a very simple operation, let's see how to proceed in this tutorial. First of all, make sure that the key is…
How to disassemble the high pressure fuel pump of the Audi A3 8v
How to disassemble the high pressure fuel pump of the Audi A3 8v
Audi A3 (2012-2019 / 8V, MK 3) The guide shows you how to replace the Audi A3 8v tfsi high pressure fuel pump. The first thing to do is to make the vehicle safe and then to open th…
How do I replace the fuel pump on the Audi A3?
How do I replace the fuel pump on the Audi A3?
Audi A3 (2003-2013 / MK 2, 8P) To be able to replace the fuel pump of the Audi A3 you have to go to access the rear seats of the car, which will have to be removed by unhooking the…

Other guides you may be interested in

How to Remove the Gear Knob on an Opel Astra

How to replace the gear knob on an Opel Astra? Follow these steps: use a plastic lever to disconnect the leather gaiter frame (if you need to replace it). Grip the knob with both hands and pull it upwards (with a strong and decisive motion) until it comes off the gear stick. For installation: fit the new gaiter and position it on the centre tunnel, take the new knob and push it onto the stick, tightening it until fully threaded. Test the movement of the stick on the centre tunnel to ensure the knob is correctly fitted.

Watch the video!


by ScegliAuto

More videos