Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset the Tyre Pressure on an Audi A3

Model: Audi A3 8V, MK 3 - Years 2012-2019
Part:

In today's tutorial, you will learn how to reset the tyre pressure on an Audi A3 produced from 2012 to 2019. Start by turning on the instrument cluster without starting the engine. Then, press the "menu" button located behind the gear lever to access the car's menu. Use the central dial to select the "vehicle" option, then go to "Service & check", and finally select the tyre pressure monitoring option. Once in this last menu, simply store the new tyre pressures and confirm.

Updated on 2 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure warning light on the Audi A3
How to reset the tire pressure warning light on the Audi A3
Audi A3 (2003-2013 / MK 2, 8P) The following steps will explain the process of resetting the tire pressure monitoring system (TPMS) light on the Audi A3; before performing the rese…
Resetting the tire pressure warning light on the Audi A3
Resetting the tire pressure warning light on the Audi A3
Audi A3 (2012-2019 / 8V, MK 3) These simple steps will show us how to reset the tire pressure monitoring system (TPMS) light on the Audi A3; before performing the reset, it is nece…
How to reset the tire pressure sensor of an Audi A3?
How to reset the tire pressure sensor of an Audi A3?
Audi A3 (2020-2026 / 8Y, MK 4) To reset the tire pressure warning light on an Audi A3, start by turning on the instrument panel without starting the engine. Use the controls on the…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos