Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Exhaust Manifold Gasket

Model: Audi A6 MK 2, C5 - Years 1997-2004
Part: Engine

In this type of six-cylinder engine, there are two exhaust manifolds, one for each bank of three cylinders, and the gasket consists of six elements, each of which must be placed in line with the corresponding exhaust port. After thoroughly cleaning the gasket seating on both the cylinder head and manifold sides, removing any dirt and buildup, install the gasket elements and then the manifold, tightening the respective mounting nuts using a torque wrench. Repeat the same procedure on the other bank.

Updated on 12 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Intake Manifold Gasket Replacement
Intake Manifold Gasket Replacement
Audi A6 (1997-2004 / MK 2, C5) In the gasket kit for engine rebuilding, you will find the intake manifold gasket. Once you have thoroughly cleaned the gasket surface on both the ma…
Cleaning the EGR Valve and Intake Manifold
Cleaning the EGR Valve and Intake Manifold
Audi A6 (2004-2012 / MK 3, C6) If you experience engine performance issues, excessive smoke, and sometimes difficulty starting, there is likely a problem with clogging in the EGR v…
Cylinder Head Gasket Replacement
Cylinder Head Gasket Replacement
Audi A6 (2004-2012 / MK 3, C6) Replacing the cylinder head gasket involves several critical steps during the engine assembly phase. Ensure to replace the gaskets, oil seals, and fa…

Other guides you may be interested in

Removing the Timing Belt on a Suzuki Vitara

In this video, see the removal and replacement of the timing belt and water pump on a Suzuki Vitara. Open the bonnet and lift it, securing it in place. Use a socket wrench to remove the cooling radiator along with the associated hoses. Disconnect the power wiring using pliers, and remove the plastic undertray with a screwdriver. Use a spanner to loosen the tensioner pulley and slide the belt off its seat. Use a socket wrench to unscrew the tensioner pulley bolt, and remove the water pump as shown in the video. Fit the new water pump, the tensioner, and the belt itself, tightening everything with the socket wrench. Finally, reinstall the radiator with the securing bolts.

Watch the video!


by ScegliAuto

More videos