Do it yourself
| ||||
|
Audi A6 - Video tutorial
Model: Audi A6
C5, MK 2
- Years 1997-2004 In the emery series gasket kit, the one you use when you need to rebuild an engine, you will also find the intake manifold gasket. Once the gasket seat has been carefully cleaned, both on the manifold side and on the cylinder side, fit the new gasket by aligning it correctly with the intake ports; then position the manifold and tighten the fixing pins with the correct torque following a crisscross pattern, such as the one used in fixing the cylinder heads, to ensure uniform adhesion and avoid any leaks that would compromise the regular operation of the engine.
Posted on 2 August 2023 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow to open the fuel cap on Volkswagen Polo 5 (6R)In this video tutorial we will see how to open the cap and the fuel flap on Volkswagen Polo 6R, fifth series, by following these simple steps. First of all we go to open the car with the remote control, in order to unlock all the car locks; after which we go to press on the left side of the flap, in order to unlock the actuator and open it, as shown in the video. At this point we are going to unscrew the fuel cap to refuel; once finished the same we can screw the cap and finally close the fuel flap! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.076
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |