Do it yourself
Frequently asked questions about cars and motorcycles

Valve Cover Gasket Replacement

Model: Audi A6 MK 2, C5 - Years 1997-2004
Part: Engine

Before applying the new gasket, it is essential to thoroughly clean the gasket seating on both the cylinder head and under the cover itself to remove any dirt or buildup that could compromise the gasket's adhesion and sealing. Once the cleaning phase is complete, apply gasket sealant at the corners where the camshaft mounting brackets are located, where the oil seal sits. At this point, align the gasket, install the cover, and tighten the corresponding fastening bolts.

Updated on 13 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Audi A6 (1997-2004 / MK 2, C5) It is recommended to perform this repair only if you have good mechanical knowledge, as the parts involved in disassembly are particularly complex. F…
Audi A6 (1997-2004 / MK 2, C5) When disassembling the engine for head gasket replacement, observe several precautions during reassembly. First, check the flatness of the surfaces (…
Audi A6 (1997-2004 / MK 2, C5) In the gasket kit for engine rebuilding, you will find the intake manifold gasket. Once you have thoroughly cleaned the gasket surface on both the ma…

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos