Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service warning light on an Audi A6

Model: Audi A6 MK 2, C5 - Years 1997-2004
Part: Service warning light

Let's see in this very short video tutorial how to reset the maintenance warning light on an Audi A6, model C5 produced from 1997 to 2004. This is a very simple operation and can be performed safely independently after changing the oil. and its filter. Let's now see how to proceed. First of all, with the vehicle still off, press and hold the button on the right of the speedometer, now let's turn on the injection of the car but without starting it. Once this is done, we release the button on the right and press the button on the left of the speedometer to perform the reset. We switch the vehicle off and on again to check the correct reset of the warning light.

Posted on 1 September 2022 by ScegliAuto

Video tutorial

Related tutorials

Service reset on an Audi A6.
Service reset on an Audi A6.
Audi A6 (1997-2004 / MK 2, C5) In this very short tutorial today, we will see how to reset the service light on an Audi A6, model C5, produced from 1997 to 2004. This operation is …
Reset service warning light Audi a6
Reset service warning light Audi a6
Audi A6 (2011-2018 / MK 4, C7) In this short video tutorial we will see the instructions to be able to reset the service light of the routine maintenance of the oil change of an Au…
How to reset the maintenance light on the Audi A6
How to reset the maintenance light on the Audi A6
Audi A6 (2011-2018 / MK 4, C7) These simple steps will show us how to reset the maintenance reminder (engine oil change) of the Audi A6. First of all, we get on board the car and s…

Other guides you may be interested in

How to Remove the Front Brake Pads on a Chrysler PT Cruiser

To remove the front brake pads on a Chrysler PT Cruiser, position the car on a column lift and raise it to a comfortable height. Unscrew the pins using a socket wrench or air drill and remove the wheel. Then, use a screwdriver to detach the brake pads. Next, remove the caliper bracket and unscrew the pins on the brake disc (using a Torx screwdriver). Pull the disc towards you to slide it off the hub. Install the new brake disc with all associated pins, secure the caliper bracket to the disc and the pads, then mount the brake caliper, ensuring all pins are tightened properly. Before mounting the wheel, bleed the brake caliper and tighten the pin.

Watch the video!


by ScegliAuto

More videos