Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Service reset on an Audi A6.

Model: Audi A6 MK 2, C5 - Years 1997-2004
Part: Service warning light

In this very short tutorial today, we will see how to reset the service light on an Audi A6, model C5, produced from 1997 to 2004. This operation is very simple and can be done entirely on your own in just a few seconds, but let's see how to proceed. Let's start the procedure by pressing and holding the right button on the speedometer, then turning on the instrument cluster of the vehicle without starting the engine. Finally, we release the right button and briefly press the left button on the speedometer to reset the service light and complete the task as shown in the video.

Posted on 10 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service on an Audi A6 C6
How to reset the service on an Audi A6 C6
Audi A6 (2004-2012 / MK 3, C6) In this video, we see how to reset the service of the 2005 Audi A6, specifically the C6 version. On this version, it is not possible to perform a man…
How to reset the service light on the 2004 Audi A6
How to reset the service light on the 2004 Audi A6
Audi A6 (2004-2012 / MK 3, C6) To reset the maintenance service light on a 2004 Audi A6 vehicle, we need to turn on the instrument panel and press the trip button a, located on the…
How to reset the service indicator light on the Audi A6
How to reset the service indicator light on the Audi A6
Audi A6 (2011-2018 / C7, MK 4) Today's information will allow us to reset the service light for the regular maintenance of the oil change for the Audi A6. First, we get on board th…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos