Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Rear Headlight Bulb

Model: Audi A4 B7 - Years: 2004, 2005, 2006, 2007, 2008
Part: Tail light bulb

See other generations:
Video tutorial

To replace the rear headlight bulb, you need to remove the headlight assembly: open the trunk and locate the circular carpeted cover next to the light. Open the cover and remove the screw underneath, also taking out the plastic bushing.

Then, rotate the inner edge of the headlight outward to extract it from its housing. Disconnect the power connector, release the bulb holder by pressing on the locking tabs, and replace the bulbs, which have a bayonet-type fitting: press and twist.

Reverse the steps for installation and check for proper operation.


Updated on 13 February 2026 by ScegliAuto


Related tutorials

Replacing Rear Headlight Bulb
Replacing Rear Headlight Bulb
Audi A4 (2004-2008 / B7) To replace the rear headlight bulb, you need to remove the headlight itself: open the trunk and locate the cap on the plastic cover corresponding to …
Replacing Rear Headlight Bulb
Replacing Rear Headlight Bulb
Audi A4 (2007-2016 / B8) To replace the rear headlight bulb, you need to remove the headlight itself: open the trunk, also open the side carpet cover, unscrew the plastic ret…
How to replace the headlight bulb of the Audi A4
How to replace the headlight bulb of the Audi A4
Audi A4 (2004-2008 / B7) To replace the rear headlight bulb of an Audi A4 model b7, we need to: - open the trunk; - unscrew the screw located on the inside, towards the headl…

Other guides you may be interested in

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos