Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Third Brake Light

Model: Audi A6 C6, MK 3 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Light bulb

See other generations:
Video tutorial

The so-called third brake light is installed at the center top of the rear window. To remove it, first take off the plastic cover strip located between the headliner and the rear window.

This is secured with push clips, so pry it down to release it (use a plastic trim tool instead of a screwdriver). Next, remove the side clips that hold the third brake light in place and disconnect the corresponding connector.

Proceed in reverse for installation, securing the light with the side clips, connecting the power connector, and repositioning the plastic cover.


Updated on 14 February 2026 by ScegliAuto


Related tutorials

Removing and Replacing the Third Brake Light of an Audi A6
Removing and Replacing the Third Brake Light of an Audi A6
Audi A6 (2004-2012 / C6, MK 3) Let’s briefly go over the instructions that will allow you to remove and replace the third brake light and its bulbs on an Audi A6. First, open the r…
How to Remove the Third Brake Light and Its Bulbs on an Audi A6
How to Remove the Third Brake Light and Its Bulbs on an Audi A6
Audi A6 (1997-2004 / MK 2, C5) These simple steps will allow you to remove the third brake light assembly and replace its bulbs on an Audi A6. First, open the trunk of the vehicle …
How to replace the third brake light bulb of the Audi A6
How to replace the third brake light bulb of the Audi A6
Audi A6 (2004-2012 / C6, MK 3) Today we will see the instructions that will allow us to disassemble and replace the third brake light bulbs of the Audi A6. First, we open the rear …

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos