Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Battery on an Audi A3

Model: Audi A3 8V, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Key

See other generations:
Video tutorial

In this tutorial, you will see how to replace the remote battery on an Audi A3 by following simple steps that will guide you through the proper maintenance of your car. To open the remote key, you will need a small flat-head screwdriver and a CR2032 flat battery (the battery commonly used in car remotes).

To open the cover, first, press the button to open the metal key. You will notice a small tab; this tab is used to open the cover.

On the back, there is a small slot where you can insert the screwdriver with slight pressure. Once opened, replace the old battery with a new one and close the cover.


Updated on 19 June 2026 by ScegliAuto


Related tutorials

How to replace the battery of the Audi A3 remote control
How to replace the battery of the Audi A3 remote control
Audi A3 (2003-2013 / 8P, MK 2) Today we will explain how to replace the battery of the RS model remote control for the Audi A3. The battery we will use is a CR 2032. Pull up the to…
How to replace the battery of the 2017 Audi S3 remote control
Audi A3 (2012-2019 / 8V, MK 3) To replace the battery of a 2017 Audi S3 remote control, we need to use a CR2032 model battery and a flathead screwdriver. Lift the key from the remo…
How to Replace the Audi A3 Remote Control Battery?
How to Replace the Audi A3 Remote Control Battery?
Audi A3 (2012-2019 / 8V, MK 3) To replace the remote control battery of the Audi A3, lift the cover on the back of the remote, located just below the manufacturer's logo. By removi…

    Frequently Asked Questions

    • A3 2012-2019 - The key battery light on Audi A3 comes on: what does it mean? Read answer

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos