Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Warning Light on an Audi A3

Model: Audi A3 8P, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Service warning light

See other generations:
Video tutorial

In this video tutorial, you will see the very simple and immediate operation to reset the service light on a 2009 Audi A3. First, turn on the instrument cluster without starting the engine. To perform the operation, use the lever located to the right of the information display, near the speedometer.

Pull the lever towards you for about five seconds to enter the service menu. Then, continue pulling the lever until the service menu text is replaced by a series of "---" and the reset will be completed.

Turn off and restart the vehicle to verify the reset.


Updated on 25 June 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Warning Light on an Audi A3
How to Reset the Oil Warning Light on an Audi A3
Audi A3 (1996-2003 / MK 1, 8L) Resetting the oil warning light on an Audi A3 is a simple and quick task that can be done independently, and it should only be performed after changi…
Reset Service Light on Audi A3
Reset Service Light on Audi A3
Audi A3 (2003-2013 / 8P, MK 2) Want to reset the oil warning light on an Audi A3? Follow these steps to clear the warning light. Turn on the ignition (you will see the maintenance …
How to reset the oil light on the Audi A3 8V.
How to reset the oil light on the Audi A3 8V.
Audi A3 (2012-2019 / 8V, MK 3) To reset the oil warning light on your Audi A3 8V, simply follow the procedure below. First, get into the car and start the infotainment system. Then…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos