Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset MMI multimedia system in Audi Q3?

Model: Audi Q3 8U - Years 2011-2018
Part: Warning light – error code

In the event that the MMI multimedia system of our Audi Q3 shows signs of malfunctioning, or we have activated unwanted functions, we can try to solve the problem by performing a reset. Let's see how to proceed in this tutorial. First of all, insert the key and turn on the instrument panel, then hold down the "SETUP" button, the central knob and the directional arrow at the top right at the same time. At this point, the display will turn off and it will be sufficient to wait for the complete restart of the system. If the problems persist, it is very likely that there is a real fault.

Posted on 22 November 2022 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service indicator on an Audi Q3
How to reset the service indicator on an Audi Q3
Audi Q3 (2011-2018 / 8U) In this video, we see how to reset the service light on a 2017 Audi Q3: turn on the ignition, press the "menu" button located on the left side of the…
How to reset the service indicator on an Audi Q3
How to reset the service indicator on an Audi Q3
Audi Q3 (2018-2025 / F3) Let's see how to reset the service light on a 2020 Audi Q3 through the infotainment system: turn on the ignition and press the "home" button on the M…
How to reset the tire pressure sensor on an Audi Q3 f3
How to reset the tire pressure sensor on an Audi Q3 f3
Audi Q3 (2018-2025 / F3) We can see in this video how to reset the tire pressure warning light of the Audi Q3: first, we need to go to the multimedia button panel, located in…

    Frequently Asked Questions

    • Q3 2018-2025 - What are the yellow warning lights of the Audi Q3? Read answer

How to Remove the CV Boot on Fiat Panda

Let’s see how to remove the boot from the joint on a Fiat Panda. After positioning your car on a column lift: raise it to a comfortable height to work on, loosen the wheel nuts (using a socket wrench or air drill) and remove the wheel. Begin unscrewing the brake disc bolts with a socket wrench. Remove the bolts located under the disc and completely detach the wheel hub. Pull the arm around the joint with your hands. Fit the new boot (after removing the old one) onto the constant velocity joint, then start reassembling all the parts in reverse order.

Watch the video!


by ScegliAuto

More videos