Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel of an Audi A3

Model: Audi A3 8V, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Car door

See other generations:
Video tutorial

Let's see how to remove the door panel of an Audi A3. This is a very simple and quick job. Open the door. First, remove the upper part of the door handle.

You can do this using a plastic spatula to avoid damaging any part of your vehicle. Then, using a 25 mm Torx screwdriver, remove the two screws above and one below the handle.

Once the screws are removed, again using the plastic spatula, start from the bottom and gently pry, then push from the bottom upwards with slight taps to release the panel. Remove the handle and disconnect all the electrical connectors.

The panel is now completely free.


Updated on 26 June 2026 by ScegliAuto


Related tutorials

How to disassemble the door panel of an Audi A3
Audi A3 (2012-2019 / 8V, MK 3) Today we will see how to disassemble the panel of the front left door of an Audi A3 model 8V. We remove the cover of the central panel and the silver…
How to Remove the Door Panel of an Audi A3
How to Remove the Door Panel of an Audi A3
Audi A3 (2012-2019 / 8V, MK 3) Do you want to remove the front door panel of an Audi A3? Follow these steps. First, disconnect the battery terminals located in the engine bay. Afte…
How to remove the door panel of the Audi A3.
How to remove the door panel of the Audi A3.
Audi A3 (2003-2013 / 8P, MK 2) Let's see the instructions that will allow us to disassemble and remove the front door panel of the Audi A3. First, we open the front door of the veh…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos