Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the gear knob on the Audi A3

Model: Audi A3 8V, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Transmission

See other generations:
Video tutorial

The gear knob on your Audi A3 is one of the most used components and therefore most subject to wear. For this reason, it may be necessary to replace it, and below is a very simple method that will allow you to carry out this task in just a few minutes.

First, fully lift and remove the leather cover using a small spatula or similar object. Next, lift the knob and remove the entire gear lever.

Replace the old knob with the new one and finally reposition the gear lever correctly to complete the procedure.


Updated on 30 June 2026 by ScegliAuto


Related tutorials

Removing the Automatic Gear Knob on the Audi A3
Removing the Automatic Gear Knob on the Audi A3
Audi A3 (2012-2019 / 8V, MK 3) This guide shows how to remove and replace the automatic gear knob on the Audi A3, as well as other models from the manufacturer. First, get inside t…
How to Replace the Gear Knob on an Audi A3?
How to Replace the Gear Knob on an Audi A3?
Audi A3 (1996-2003 / MK 1, 8L) To replace the gear knob on an Audi A3, detach the retaining clips located at the base of the gear gaiter so that it can be completely lifted. After …
How to Change the Gear Knob on an Audi A3
How to Change the Gear Knob on an Audi A3
Audi A3 (1996-2003 / MK 1, 8L) To change the gear knob on an Audi A3, start by removing the gaiter using a plastic wedge. Then, use a screwdriver to lever off the clip that holds t…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos