Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Door Panel on an Audi A6 Avant?

Model: Audi A6 C7, MK 4 - Years 2011-2018
Part: Door trim panel

In this tutorial, you will see how to remove the front door panel on an Audi A6 Avant, a very simple and quick operation. First, open the door in question. Then, using a plastic trim tool to avoid leaving marks, pry off the handle trim and remove the screws exposed with a Torx screwdriver. Next, remove the screw located below the window switch console, leverage along the inner slot of the panel, and detach it from the door. Finally, disconnect both the connector and the lock cable, and install the replacement if necessary.

Updated on 2 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the trunk lining of the Audi A6 Avant
How to disassemble the trunk lining of the Audi A6 Avant
Audi A6 (2011-2018 / C7, MK 4) In this video we can see how to disassemble the rear wiper panel of the Audi A6 Avant; it was leaking water from the disconnected tube which has been…
Professional replacement of the timing chain of an Audi A6 Avant 3.0 TDI.
Professional replacement of the timing chain of an Audi A6 Avant 3.0 TDI.
Audi A6 (2011-2018 / C7, MK 4) The replacement of the timing chain is not a job that can be done in the home garage, we must acknowledge that. It is a long and complex job, requiri…
How to Remove the Left Front Door Panel of an Audi A6
How to Remove the Left Front Door Panel of an Audi A6
Audi A6 (2011-2018 / C7, MK 4) Before you can start, open the left front door of your Audi A6. Begin by prying and removing the door panel inserts using a thin but sturdy tool. Nex…

Other guides you may be interested in

How to Replace the Remote Battery for the Volvo XC40?

In this tutorial, you will see how to replace the battery in the remote for the Volvo XC40, a very simple and quick operation. For this, you will need a replacement battery of type CR2032 and possibly a small flathead screwdriver. First, remove the front cover by pressing the button on the metal ring, then locate the second button, press it as well, and remove the opposite cover. Next, open the circular cap, take out the old battery, and insert the new one in the opposite direction. Finally, reassemble everything.

Watch the video!


by ScegliAuto

More videos