Do it yourself
Frequently asked questions about cars and motorcycles

How to Install Puddle Lights on an Audi A3

Model: Audi A3 8V, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Body

See other generations:
Video tutorial

Let’s see how to install puddle lights on the front doors of an Audi A3: they are called puddle lights because when you open the door, these lights, installed at the bottom of the door, allow you to see any puddles under the door and avoid stepping in them when exiting the vehicle.

The Audi A3 does not come with them but has the provision for installation.

First, remove the door panels and make the hole where the provisions are. In the video, they install lights that project the Audi logo onto the ground. There are also original Audi lights available, but they cost £124.22. If you settle for non-original ones, you can find them everywhere at lower prices.

A typical price is: E-Bay code 1672148868091 costs £28.00 + £5.00 for delivery. Fit the light into its hole (which we will have prepared in the meantime).

The video indicates that, lacking the provision, we will need to connect the positive wiring connector to "alpine 16", while the negative goes to "alpine 5" with a jumper. Now do the same for the other door.

Refit the door trim and the job is done.


Updated on 2 July 2026 by ScegliAuto


Related tutorials

Audi A3 (2012-2019 / 8V, MK 3) These new LED lights make the car even more attractive and modern. They can project the model name directly onto the surface below for a visually str…
Audi A3 (2003-2013 / 8P, MK 2) In this tutorial, we can see how to replace the rear lights on the Audi A3, an extremely simple and quick operation. First of all, make sure that the…
Audi A3 (2003-2013 / 8P, MK 2) In this tutorial we can see how to disassemble the rear lights on the Audi A3, an extremely simple and quick operation. First of all, make sure that …

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos