Do it yourself
| ||||
|
Audi A3 - Video tutorial
Model: Audi A3
MK 3, 8V
- Years 2012-2019 These new LED lights allow you to make your car even more captivating and modern. In fact, they are able to project the name of the model directly on the underlying surface for a visual effect of sure impact. To be able to assemble them, no particular dexterity is required and everything takes a few minutes. First, open the door and unclip the light by using a light lever with a flat screwdriver. At this point, remove the plug as well. Repeat the same operations on the other door as well. All that remains is to mount the new LED lights by first connecting them to the appropriate plug and, finally, relocating them to the initial position.
Posted on 5 July 2022 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.007
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |