Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the remote control battery in the Audi A4 B5?

Model: Audi A4 B5 - Years 1994-2000
Part: Key

To be able to replace the battery of the remote control of the Audi A4 B5 you have to pry in the small grooves that are located in the upper side parts of the device; in this way it will be possible to divide the two halves of the remote control so that the battery inside can be accessed. The latter can therefore now be removed from its housing, so that it can be replaced with a new one. After the replacement it will be possible to close the two halves of the remote control; finally it will be necessary to make sure that the battery has been installed correctly and verify that the device works.

Posted on 3 February 2023 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the battery of the Audi A4 remote control?
How do you replace the battery of the Audi A4 remote control?
Audi A4 (2014-2024 / B9) In order to replace the battery of the remote control on the Audi A4, you need to press the button on the top of the device so that you can remove th…
How to replace the battery of the Audi A4 remote control
How to replace the battery of the Audi A4 remote control
Audi A4 (2014-2024 / B9) One of the main causes of a car remote not functioning properly is simply a dead battery, and today we will explain how to replace the battery on the…
How do I replace the battery in the Audi A4 remote control?
How do I replace the battery in the Audi A4 remote control?
Audi A4 (2014-2024 / B9) In order to replace the battery of the Audi A4 remote control, you must use an object that acts as a lever to be able to lift the cover of the front …

How to Remove the Original Radio on a Honda CR-V

How do you remove the original radio on a Honda CR-V? First, use a plastic lever to remove the side cover of the radio (the air vents), then, with a screwdriver, unscrew the securing screws located on the sides (if present). After unscrewing the side screws (and disconnecting the clips) of the stereo, pull it out from its slot and remove it (disconnect the various power connectors at the back). To install the new stereo and the various removed parts, proceed in reverse order.

Watch the video!


by ScegliAuto

More videos