Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. A3
    4. : How to perform a service reset in an Audi A3 MK2

Audi A3 - Video tutorial

Model: Audi A3 MK 2, 8P - Years 2003-2013
Part: -board computer
Operation: How to perform a service reset in an Audi A3 MK2

In this video tutorial we can see how it is possible to reset the service in an Audi A3 MK2, by following a few simple steps: before resetting the service, you need to carry out maintenance on the vehicle such as changing the engine oil and filters ; after carrying out the do-it-yourself maintenance of the vehicle, you have to get into the car, turn the key and turn on the ignition, now pull the right tab that you find under the speedometer, keep holding the tab down, until you see the message "change" in the display, at this point, you can release the button. Now all you have to do is turn off the car and then turn it on again and you will see that the wrench has disappeared. Reset done.


Posted on 16 May 2023 by ScegliAuto

    Frequently Asked Questions

    • A3 2012-2019 - What does the TPMS warning light on the Audi A3 indicate? Read Answer
    • A3 2003-2013 - How many liters is the reserve of the Audi A3? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos