Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Wiper Motor from the Audi A4 B8

Model: Audi A4 B8 - Years 2007-2016
Part: Windshield wipers

This guide shows how to remove the rear wiper motor from the Audi A4 B8. After removing the courtesy light and the screws securing the trunk door panel, remove the panel and the electrical connectors. Remove the outer wiper arm before taking out the motor. At this point, disconnect the power cable to the motor by gently pulling on the cable; remove the water supply hose by sliding the tube out of the fitting. Now you can unscrew the three 10 mm bolts. Grasp the motor and pull it out of the protective seal on the glass. Replace the seal if necessary, and reinstall the motor in position. Check the proper operation before reinstalling the trim panel.

Updated on 14 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the rear windshield wiper motor of the Audi A4
Replacement of the rear windshield wiper motor of the Audi A4
Audi A4 (2004-2008 / B7) In this short guide, we will see the instructions that will allow us to disassemble and replace the rear windshield wiper motor of the Audi A4. First…
Disassembly of the rear windshield wiper motor of the Audi A4.
Disassembly of the rear windshield wiper motor of the Audi A4.
Audi A4 (2007-2016 / B8) The steps illustrated in this guide will show us how to disassemble and replace the rear windshield wiper motor or rear wiper of the Audi A4. First, …
How to replace the rear windshield wiper motor of an Audi A4 8P
How to replace the rear windshield wiper motor of an Audi A4 8P
Audi A4 (2007-2016 / B8) As we can see in this video, the rear windshield wiper of this Audi A4 8P was not parking in the correct position, and the windshield washer was not …

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos