Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the rear windshield wiper motor of the Audi A4

Model: Audi A4 B7 - Years: 2004, 2005, 2006, 2007, 2008

See other generations:
Video tutorial

In this short guide, we will see the instructions that will allow us to disassemble and replace the rear windshield wiper motor of the Audi A4. First of all, we open the rear trunk door and start disassembling and removing the rear trunk door panel, unscrewing all the fixing screws; then we remove the wiper arm by unscrewing the central nut, then unscrew the screws of the windshield wiper motor and disconnect its electrical connector, as shown in the video.

At this point, we install the new components and finally reassemble the wiper arm!


Posted on 8 January 2025 by ScegliAuto


Related tutorials

Removing the Rear Wiper Motor on the Audi A4
Removing the Rear Wiper Motor on the Audi A4
Audi A4 (2007-2016 / B8) The steps illustrated in this guide will show you how to remove and replace the rear wiper motor or rear windshield wiper on the Audi A4. First, remo…
How to Replace the Rear Windshield Wiper Blade on an Audi A4
How to Replace the Rear Windshield Wiper Blade on an Audi A4
Audi A4 (2007-2016 / B8) Before you begin, exit your Audi A4 and head to the rear hatch. Start by lifting the entire wiper arm, which will also raise the blade you need to re…
Replacement of the front windshield wipers of the Audi A4
Replacement of the front windshield wipers of the Audi A4
Audi A4 (2000-2004 / B6) Today we will see the instructions that will allow us to disassemble and replace the front wipers of the Audi A4, in simple and quick steps. First of…

    Frequently Asked Questions

    • A4 2004-2008 - How much does it cost to change ownership of an Audi A4 1.9 TDI? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos