Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Turbo Pressure Gauge Repair

Model: Audi A4 B6 - Years 2000-2004
Part: Accessory kit

If you have installed a gauge to monitor turbo pressure, the most challenging part of the job was likely routing the hose from the engine compartment to the cabin, connecting the intake duct to the gauge itself. That said, if there is a leak at the connection between the hose and the gauge, you can fix it by cutting the hose to remove the damaged section. However, before securing the hose back to the fitting with a clamp, apply some duct tape to reinforce the area where the clamp will sit.

Updated on 17 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Installing a Turbo Pressure Gauge
Installing a Turbo Pressure Gauge
Audi A4 (2000-2004 / B6) In the 1980s and 1990s, the turbo pressure gauge was a common accessory in the instrument cluster of many turbocharged cars, but it has gradually dis…
Resetting the tire pressure warning light on Audi A4 b8
Resetting the tire pressure warning light on Audi A4 b8
Audi A4 (2007-2016 / B8) Before carrying out the reset procedure, check the condition of the tires and their pressure using a pressure gauge. If everything seems to be OK but…
How to replace the fuel pump of the Audi A4
Audi A4 (2000-2004 / B6) Today we will discover the instructions that will allow us to disassemble and replace the fuel pump of the Audi A4, in simple steps. First of all, we…

How to Remove the Door Panel from a Renault Clio

How to remove the panel from a Renault Clio? Don't worry, let's see together in this video how to proceed. Before starting the disassembly, disconnect the battery terminals located in the engine bay. Begin the disassembly: remove the plastic cover of the handle with a lever, then use a screwdriver to unscrew the internal door handle and the screws located there. Once removed, take out the window switch button, unscrew the internal door opening lever. Detach the door panel and disconnect the speaker. Be careful not to lose any of the clips behind the plastic panel you removed earlier. Replace the part and reassemble everything in reverse order.

Watch the video!


by ScegliAuto

More videos