Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installing a Turbo Pressure Gauge

Model: Audi A4 B6 - Years: 2000, 2001, 2002, 2003, 2004
Part: Accessory kit

See other generations:
Video tutorial

In the 1980s and 1990s, the turbo pressure gauge was a common accessory in the instrument cluster of many turbocharged cars, but it has gradually disappeared, replaced by aftermarket kits that include the gauge and the necessary installation set. Essentially, you need to tap into one of the boost hoses, insert a T-fitting from which to run a hose into the cabin, and connect the gauge, which will also need to be powered with 12 volts (it is recommended to install it above the instrument cluster, near the windshield pillar).


Updated on 19 February 2026 by ScegliAuto


Related tutorials

Turbo Pressure Gauge Repair
Turbo Pressure Gauge Repair
Audi A4 (2000-2004 / B6) If you have installed a gauge to monitor turbo pressure, the most challenging part of the job was likely routing the hose from the engine compartment…
Reset Tire Pressure Light on Audi A4 B8
Reset Tire Pressure Light on Audi A4 B8
Audi A4 (2007-2016 / B8) Before performing the reset procedure, check the condition of the tires and their pressure using a gauge. If everything seems normal but the tire pre…
How to Calibrate the Fuel Gauge on an Audi A4?
How to Calibrate the Fuel Gauge on an Audi A4?
Audi A4 (2014-2024 / B9) To calibrate the fuel gauge on the Audi A4, connect the diagnostic tool to the OBD port of the vehicle, located below and to the left of the steering…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos