Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Calibrate the Fuel Gauge on an Audi A4?

Model: Audi A4 B9 - Years 2014-2024
Part: Checks and maintenance

To calibrate the fuel gauge on the Audi A4, connect the diagnostic tool to the OBD port of the vehicle, located below and to the left of the steering column. Once connected, navigate through the menu on the display and select "Tank Sensor 1," which corresponds to the specific car model and engine. By following all the steps shown in the video, you can adjust the sensitivity of the float, ensuring that the quantity displayed matches the actual amount.

Updated on 8 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Drain the Fuel Tank of the Audi A4
How to Drain the Fuel Tank of the Audi A4
Audi A4 (2000-2004 / B6) Today, you will learn in this brief and simple guide how to drain the fuel in case of an emergency or if the wrong fuel has been added to the Audi A4…
How to Remove the Fuel Pump from the Audi A4 Fuel Tank
How to Remove the Fuel Pump from the Audi A4 Fuel Tank
Audi A4 (2000-2004 / B6) Is the fuel pump on your Audi A4 damaged? Here’s how to remove it. Start by removing the rear seats to access the fuel pump. Use a socket wrench to u…
How to Replace the Fuel Filter on an Audi A4
How to Replace the Fuel Filter on an Audi A4
Audi A4 (2000-2004 / B6) Before starting, open the hood of your Audi A4. First, unclip and remove the engine cover to access the fuel filter. Next, disconnect the hoses conne…

    Frequently Asked Questions

    • A4 2007-2016 - How does the navigation system of my Audi A4 work? Read answer
    • A4 2004-2008 - Where is the AUX cable socket on the Audi A4? Read answer

Where to Find the Fuses in the Nissan Qashqai

The fuse box in the Nissan Qashqai's cabin is located to the left of the steering wheel, where there is a small cover. Pull it off to access the fuse and relay box. To replace a fuse, if that is the cause of the issue, take a small pair of pliers and remove the fuse of the non-functioning component. Check that the bridge inside the fuse is not broken; if it is broken, replace the fuse with a new one of the same amperage as the old one. If the bridge is intact, the fuse is functioning correctly.

Watch the video!


by ScegliAuto

More videos