Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. A4
    4. : How to disassemble the fuel pump from the Audi A4 tank

Audi A4 - Video tutorial

Model: Audi A4 B6 - Years 2000-2004
Part: Fuel pump
Operation: How to disassemble the fuel pump from the Audi A4 tank

Is the fuel pump on Audi A4 damaged? Let's see how it disassembles. We disassemble the rear seats to access the fuel pump. Unscrew the tightening screws of the metal cap with a socket wrench, remove it from its seat, use absorbent paper around the perimeter to plug liquid leaks. Unscrew the large locking pin of the fuel pump with a chisel, disconnect the power supply terminals and the liquid circulation pipes. We extract the floating fuel pump from inside the Audi tank. We mount the new fuel pump.


Posted on 5 December 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • A4 2007-2016 - Where is the fuel pump relay located in the Audi A4? Read Answer
    • A4 2007-2016 - Where is the tank float located in the Audi A4? Read Answer
    • A4 2004-2008 - Where is the fuel pump located in the Audi A4? Read Answer
    • A4 2007-2016 - Where is the high pressure fuel pump of the Audi A4 TFSI located? Read Answer
    • A4 2000-2004 - Where is the fuel pump of the 2002 Audi A4 located? Read Answer

Replace the steering angle sensor on the Volkswagen Golf 5

When the steering angle sensor malfunction warning light comes on, it may need to be replaced as follows: first remove the steering wheel and the lower steering wheel guard by removing the three fixing screws. The steering sensor is located just below the steering column. To release it you need to have a small screwdriver and insert it into the hole on the front, push the screwdriver all the way down until the clips at the bottom are released. Next, pull down on the back of the card containing the sensor and disengage it from the steering column. At that point take the new card and reposition it, after which proceed backwards to reassemble the various components.

Watch the video!


by ScegliAuto

More videos