Do it yourself
| ||||
|
Audi A4 - Video tutorial
Model: Audi A4
B6
- Years 2000-2004 Replacing the fuel pump on an Audi A4? Let's see how the pump is disassembled from inside the tank. We open the rear door and remove the seats from the seats. Unscrew the tightening screws of the metal cap with a socket wrench, remove it from its seat. We disconnect the electrical clamp from above the pump. We wrap the entire perimeter of the sheet with absorbent paper, then, with unscrew the tightening screws. Disconnect the power supply terminals and the liquid circulation tubes. We extract the fuel pump from inside the tank. We fix the pump inside its housing and screw the screws. We mount the rear seats.
Posted on 17 December 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to open the bonnet of the Volkswagen PoloLet's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.026
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |