Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove a rear light on the Audi Q5.

Model: Audi Q5 MK 1, 8R - Years 2008-2017
Part: Tail light

In the following video, we will see how to disassemble the rear taillight of the 2017 Audi Q5. The first thing to do is to remove the cover located underneath the taillight that we want to remove. Inside, you will see a screw. Using a long enough star screwdriver, try to unscrew it until it becomes light. At this point, insert your hand into the slot and pull the stop taillight outwards. As you can see, this is a very simple job. Similarly, to reassemble the rear taillight, simply follow the reverse process until you close the cover of the slot from which we extracted our taillight.

Posted on 15 May 2023 by ScegliAuto

Video tutorial

Related tutorials

How to remove the rear bumper light of the Audi Q5
How to remove the rear bumper light of the Audi Q5
Audi Q5 (2017-2025 / 80A, MK 2) Below we will see the instructions that will allow us to disassemble and replace the rear bumper light of the Audi Q5, in simple steps. First of all,…
How to remove the rear light of the Audi Q5.
How to remove the rear light of the Audi Q5.
Audi Q5 (2008-2017 / MK 1, 8R) The guide shows how to disassemble the left rear light of the Audi Q5. The first operation to be performed is to open the trunk door and remove the f…
Replacement of the rear fog light bulb of the Audi Q5
Replacement of the rear fog light bulb of the Audi Q5
Audi Q5 (2008-2017 / MK 1, 8R) Below we will see the instructions that will allow us to disassemble and replace the rear bumper light bulb (fog light) of the Audi Q5. First of all,…

How to Remove the Starter Motor on a Ford Focus

Open the front bonnet and secure it; disconnect the starter motor power terminals using pliers or a screwdriver, depending on the pressure of the tabs. Use a socket spanner to undo the bolts securing the starter motor and remove it from the engine bay (disconnect the various wiring). Finally, fit the new starter motor by connecting the power cables and securing it with the associated bolts. Prepare to refit the engine to the vehicle along with all its components.

Watch the video!


by ScegliAuto

More videos