Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the rear fog light bulb of the Audi Q5

Model: Audi Q5 MK 1, 8R - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Fog lights

See other generations:
Video tutorial

Below we will see the instructions that will allow us to disassemble and replace the rear bumper light bulb (fog light) of the Audi Q5. First of all, let's move to the rear of the vehicle and remove the small plastic cap located under the fog light; then unscrew the screw inside and then lever on the side of the light to detach and remove it, as shown in the video.

At this point, disconnect the connector and the bulb holder, removing and replacing the small bulb; install the new one and secure the fog light.


Posted on 29 March 2025 by ScegliAuto


Related tutorials

Replacing the Rear Bumper Light Bulb on an Audi Q5
Replacing the Rear Bumper Light Bulb on an Audi Q5
Audi Q5 (2017-2025 / MK 2, 80A) In this brief guide, you will find instructions to remove and replace the light bulb of the rear bumper light on an Audi Q5. First, move to the back …
How to Remove the Rear Light of the Audi Q5
How to Remove the Rear Light of the Audi Q5
Audi Q5 (2008-2017 / MK 1, 8R) This guide shows how to remove the left rear light of the Audi Q5. The first step is to open the trunk and remove the trim plastic from the back of t…
How to Remove the Rear Bumper Light on an Audi Q5
How to Remove the Rear Bumper Light on an Audi Q5
Audi Q5 (2017-2025 / MK 2, 80A) Below are the instructions that will allow you to remove and replace the rear bumper light on an Audi Q5 in simple steps. First, move to the back of …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos