Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear bumper light of the Audi Q5

Model: Audi Q5 MK 2, 80A - Years 2017-2025
Part: Tail light

Below we will see the instructions that will allow us to disassemble and replace the rear bumper light of the Audi Q5, in simple steps. First of all, let's move to the back of the trunk and start by removing the small plastic cap that we find on the bumper; then unscrew the fixing screw of the rear light to detach it and remove it, disconnecting the electrical connector, as shown in the video. At this point, if necessary, we replace the bulbs of the rear light or directly the entire light, applying the reverse procedure for reassembly!

Posted on 22 August 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Rear Bumper Light Bulb on an Audi Q5
Replacing the Rear Bumper Light Bulb on an Audi Q5
Audi Q5 (2017-2025 / MK 2, 80A) In this brief guide, you will find instructions to remove and replace the light bulb of the rear bumper light on an Audi Q5. First, move to the back …
How to Replace the Rear Light of an Audi Q5
How to Replace the Rear Light of an Audi Q5
Audi Q5 (2008-2017 / MK 1, 8R) In this guide, learn how to replace the rear light of an Audi Q5. First, open the compartment under the light in the rear bumper, remove the cover, a…
How to Remove the Rear Bumper of the Audi Q5?
How to Remove the Rear Bumper of the Audi Q5?
Audi Q5 (2008-2017 / MK 1, 8R) To replace the rear bumper of the Audi Q5, first remove the rear position light assemblies located at the top of the bumper. Once these lights are re…

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos