Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Air Filter

Model: Audi Q7 MK 1, 4L - Years 2006-2015
Part: Cabin air filter

This video tutorial shows all the steps to replace the old cabin air filter in an Audi Q7 4L. The filter is located under the glove compartment on the passenger side. First, remove the cover by working from the bottom and then from the top. Now, unscrew the mounting screws and remove the plastic cover. Pull out the old filter. At this point, insert a new one in the same position as the one just removed. Close the cover. Remember that it should be replaced every 9,320 miles or, alternatively, annually.

Updated on 18 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement engine air filter on Audi Q7
Replacement engine air filter on Audi Q7
Audi Q7 (2015-2024 / MK 2, 4M) Open the hood and put on the special support rod. Facing from the outside towards the passenger compartment, you can find the air filter box on your …
How do I replace the passenger compartment fan on the Audi Q7?
How do I replace the passenger compartment fan on the Audi Q7?
Audi Q7 (2006-2015 / MK 1, 4L) To be able to replace the passenger compartment fan of the Audi Q7, you need to open the glovebox located on the passenger side and loosen the screws…
Audi Q7 particle filter warning light reset
Audi Q7 particle filter warning light reset
Audi Q7 (2015-2024 / MK 2, 4M) In this video tutorial we will see how to reset the particulate filter warning light on an Audi Q7, a procedure that we can take into consideration f…

Other guides you may be interested in

How to Remove the Headlight Bulbs on a Toyota Rav4

Let's see how to remove the headlight bulbs on a Toyota Rav4. Open the bonnet by pulling the lever located at the bottom right of the dashboard and secure it. Locate the inspection cap (if present) on the headlight and remove it (located at the rear of the headlight). At this point, you will find the bulbs with metal clips; pull the bulb holders out of the headlight and extract the damaged bulb using a screwdriver and pliers. Fit the new bulb (ensuring it is the correct type and size), insert the bulb holder back into the headlight housing, and close the headlight with the inspection cap. Test the lights to ensure they are functioning correctly.

Watch the video!


by ScegliAuto

More videos