Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of license plate bulbs for Audi A4.

Model: Audi A4 B8 - Years 2007-2016
Part: License plate light

In this video tutorial, we will see how to disassemble and replace the license plate bulbs of the Audi A4. First, we move to the rear of the vehicle and begin to remove the plastic light fixture of the license plate by prying on the sides with something thin. Then, we remove the wedge bulb from the socket, as shown in the video. At this point, we install the new license plate bulb with the same attachment and then fix the plastic light fixture by following the same procedure for the replacement of the other license plate light.

Posted on 3 June 2023 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the door lock on the Audi A4?
How do you replace the door lock on the Audi A4?
Audi A4 (2000-2004 / B6) The replacement of the Audi A4 door lock is carried out by completely disassembling the door panel, after the fixing screws have been unscrewed: once…
How do you replace the battery of the Audi A4 remote control?
How do you replace the battery of the Audi A4 remote control?
Audi A4 (2004-2008 / B7) The replacement of the Audi A4 remote control battery is done by levering with an object so that the cover on the back of the device can be removed: …
How do you replace the timing belt of the Audi A4?
How do you replace the timing belt of the Audi A4?
Audi A4 (1994-2000 / B5) The replacement of the timing belt of the Audi A4 is done by opening the hood and removing the right front wheel, along with the corresponding wheel …

How to Remove the Fuel Pump on Toyota Verso

Let's see how to remove the fuel pump on a Toyota Verso. First, disconnect the battery cables, then remove the rear seat from the car. You will find various wiring and a metal piece with screws; unscrew the securing screws of the metal cap and remove it. Wrap the entire perimeter of the metal panel with paper or an absorbent cloth, then, using a screwdriver and hammer, unscrew the large bolt around the pump. Disconnect the power terminals and the fluid circulation tubes. Extract the fuel pump. To reassemble, proceed in reverse order.

Watch the video!


by ScegliAuto

More videos