Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear door in the Audi A4?

Model: Audi A4 B6 - Years 2000-2004
Part: Car door

In this tutorial, we can see how to disassemble the rear door of the Audi A4, a very simple and fast operation. First of all, let's locate the small plastic cap placed on the upper hinge, then remove it and slightly loosen the bolt underneath it with a 6mm socket wrench. Next, remove the bolt from the lower hinge with a Torx T45 key, detach the wiring harness cover and disconnect the connector. At this point, we can grab the door, lift it, and separate it from the frame. To install a replacement, simply follow the reverse procedure.

Posted on 28 June 2023 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the rear side window of the Audi A4
How to disassemble the rear side window of the Audi A4
Audi A4 (2007-2016 / B8) Today's instructions will show us how to disassemble and replace the rear side glass of the Audi A4, in simple steps. First, we open the rear door an…
Disassembly of the rear windshield wiper motor of the Audi A4.
Disassembly of the rear windshield wiper motor of the Audi A4.
Audi A4 (2007-2016 / B8) The steps illustrated in this guide will show us how to disassemble and replace the rear windshield wiper motor or rear wiper of the Audi A4. First, …
Replacement of the rear windshield wiper motor of the Audi A4
Replacement of the rear windshield wiper motor of the Audi A4
Audi A4 (2004-2008 / B7) In this short guide, we will see the instructions that will allow us to disassemble and replace the rear windshield wiper motor of the Audi A4. First…

How to Remove the High-Pressure Fuel Pump on VW Golf

In this video, learn how to remove the high-pressure fuel pump on the Volkswagen Golf. Lift the bonnet and secure it, then remove the engine soundproofing panel. Using a screwdriver, unscrew the locking pins of the ventilation pipe and remove the piece from the engine bay. Start removing the fastening pins of the pump as shown in the video. Once the piece is detached from its seat, disconnect the clip present on it. Finally, refit the high-pressure fuel pump in the engine bay, along with the intake pipe and the soundproofing panel.

Watch the video!


by ScegliAuto

More videos