Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Check Timing Belt Wear on Audi A4 B8

Model: Audi A4 B8 - Years 2007-2016
Part: Timing belt

With the introduction of new materials in the automotive industry, many maintenance intervals have increased: for instance, before synthetic oils were introduced, engine oil replacement was scheduled every 3,100 mi, while now it has shifted to so-called long-life programs where oil changes are performed every 18,600 mi; similarly, the mileage for the timing belt has significantly increased from 56,000 mi to 99,500 mi. In any case, it is still advisable to periodically check the wear status of the belt: simply remove the cover on the engine and detach the clips of the plastic cover that protects the timing belt: if there are no signs of cracks, splits, or fraying, you can reassemble everything and repeat the check after another 6,200 mi.

Updated on 19 February 2026 by ScegliAuto

Video tutorial

Related tutorials

When and how to replace the timing belt of the Audi A4 2.0 TDI
When and how to replace the timing belt of the Audi A4 2.0 TDI
Audi A4 (2007-2016 / B8) In this guide, we will see the useful information for replacing the timing belt of the Audi A4 2.0 TDI; the manufacturer declares that, on this type …
Guide to replacing the timing belt of the Audi A4 2.0 TDI
Guide to replacing the timing belt of the Audi A4 2.0 TDI
Audi A4 (2007-2016 / B8) The instructions in this guide will show us how to disassemble and replace the timing belt of the Audi A4 2.0 TDI. To access the timing belt, it is n…
Removing the timing belt Audi A4, A6, (2.0 TDI)
Audi A4 (2014-2024 / B9) In this video tutorial we will see how to change the timing belt in 2.0 TDI motorized Audi, in the particular case in an Audi A4. The procedure, quit…

Other guides you may be interested in

How to Remove the Right Front Door Panel on an Opel Mokka

To remove the right front door panel on an Opel Mokka, follow these steps: disconnect the battery terminals located in the engine bay, then use a screwdriver to remove the screws from the upper door opening lever and the screws in the handle. Next, remove the covering plastic near the lever. Unscrew the remaining screws on the door panel and detach the retaining clips. Finally, pull the panel away with your hands and unclip it from the door (disconnect the power wiring and the release cable). Reassemble everything in reverse order.

Watch the video!


by ScegliAuto

More videos