Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the timing belt of the Audi A4 2.0 TDI

Model: Audi A4 B8 - Years 2007-2016
Part: Timing belt

The instructions in this guide will show us how to disassemble and replace the timing belt of the Audi A4 2.0 TDI. To access the timing belt, it is necessary to first remove the engine support, allowing us to remove the distribution cover; we lift the car to then remove the crankshaft pulley, taking the necessary references for the replacement of the belt and timing, as shown in the video. We then install the original timing belt, also replacing the water pump kit, following the video tutorial until the end!

Posted on 9 May 2025 by ScegliAuto

Video tutorial

Related tutorials

When and how to replace the timing belt of the Audi A4 2.0 TDI
When and how to replace the timing belt of the Audi A4 2.0 TDI
Audi A4 (2007-2016 / B8) In this guide, we will see the useful information for replacing the timing belt of the Audi A4 2.0 TDI; the manufacturer declares that, on this type …
When to Replace the Timing Belt on an Audi A4 2.0 TDI?
When to Replace the Timing Belt on an Audi A4 2.0 TDI?
Audi A4 (2014-2024 / B9) Today's guide will show you some important instructions for replacing the timing belt on the Audi A4 2.0 TDI. For this engine type, the timing belt s…
Guide to replacing the timing belt of the Audi A4 2.0 TDI
Guide to replacing the timing belt of the Audi A4 2.0 TDI
Audi A4 (2007-2016 / B8) Today's main instructions will show us how to disassemble and replace the timing belt of the Audi A4 2.0 TDI. First, we open the hood of the car and …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos