|
Do it yourself
| |||
| ||||
Replacing the Timing Chain on an Audi S4 V8 is a Challenging Job
Model: Audi A4
- Years:
2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Video tutorial
The video shows the replacement of the timing chain on an Audi S4 V8, a 4.2 engine known for having the chains at the rear. Unlike most engines, where the timing is at the front, here the chains are positioned at the back of the engine, between it and the transmission. This means you cannot access it with the engine in place. The procedure shown requires removing the entire front end (bumper, headlights, radiator, crossmember). Then, the engine/suspension assembly must be extracted by lowering it down or raising the body. Once out, remove the transmission, intake manifold, and rear covers to access the chains. The video shows that one of the chain guides is broken, but such a significant intervention requires replacing the tensioner, guides, and often the balance shafts and their tensioners; indeed, the labor cost is so high that it is advisable to replace everything that is subject to wear.
Posted on 29 October 2026 by ScegliAuto
Related tutorials
Audi A4
(2007-2016 /
B8)
Today's information will show you how to disassemble and replace the timing chain on the Audi A4 2.0T, following the instructions below. First, open …
Audi A4
(2007-2016 /
B8)
In a few simple steps, remove and replace the timing chain on the Audi A4 2.0 TFSI. First, open the hood of the vehicle and start by removing the fro…
Audi A4
(2007-2016 /
B8)
To replace the timing chain on an Audi A4, lift the car with a jack so that the front right wheel can be removed; you will also need to detach the co…
Other guides you may be interested in
|
Where is the Wiper Motor Fuse Located in a VW Touran?
The Volkswagen Touran has two fuse boxes. The first fuse box is located inside the cabin, behind the driver's side dashboard panel. The second fuse box is located under the bonnet, near the battery. Both fuse box covers have stickers indicating the amperage and the names of the fuses contained within. Today, you will learn how to remove the wiper fuse. Open the fuse box and use needle-nose pliers to remove fuse number 1, which is a 20 Amp green fuse. Insert a new fuse of the same type and close the fuse box. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.061
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |