Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Catalytic Converter and Flex Pipe

Model: Audi Tt MK 1, 8N - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Exhaust muffler

See other generations:
Video tutorial

The failure of the flex pipe section of the exhaust system is a common issue since it is constantly subjected to the engine and chassis vibrations, not to mention the constant thermal cycles. To replace it, you need to obtain the first section of the exhaust that includes both the flex pipe and the catalytic converter.

Position the vehicle on appropriate ramps to allow it to cool down. Generously lubricate the mounting bolts with penetrating spray and proceed to remove the flange attached to the exhaust manifold and the coupling clamp, making sure to disconnect the sensor connectors to complete the removal.

Then, work in reverse for the installation of the new part.


Updated on 19 February 2026 by ScegliAuto


Related tutorials

Front Bumper Installation Instructions
Front Bumper Installation Instructions
Audi Tt (1998-2006 / MK 1, 8N) Removing the front bumper is quite simple, but to facilitate the process, lift the vehicle on appropriate automotive jack stands to make it easier to…
Guide to Replacing the Exhaust Tip
Guide to Replacing the Exhaust Tip
Audi Tt (1998-2006 / MK 1, 8N) The video shows how to replace the exhaust tip on your car with a "tuning" style tip. After properly lifting the car on a lift, cut the original tip …
Instructions for Removing Door Panel
Instructions for Removing Door Panel
Audi Tt (1998-2006 / MK 1, 8N) Removing the door panel on the car model in question is very simple because it has only one mounting screw; start by removing the cap located at the …

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos