Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the cabin heating radiator of the Audi A3.

Model: Audi A3 MK 3, 8V - Years 2012-2019
Part: Heater core

These short instructions will show us the main steps on how to disassemble and replace the cabin heating radiator of the A3, but also of the A1. First of all, we get into the car and start disassembling and removing the glove compartment, unscrewing the fixing screws and disconnecting the electrical connector; then we will find the cabin heating radiator at the back, as shown in the video. At this point, we disconnect the coolant pipes, disconnecting and removing the cabin heating radiator; we replace it with the new one and reassemble everything!

Posted on 1 September 2023 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the Audi A3 cabin heating radiator.
Replacement of the Audi A3 cabin heating radiator.
Audi A3 (2012-2019 / MK 3, 8V) Let's see all the necessary instructions for disassembling and replacing the heater radiator of the Audi A3. First, we enter the passenger compartmen…
How do you replace the heating radiator of the Audi A3?
How do you replace the heating radiator of the Audi A3?
Audi A3 (2012-2019 / MK 3, 8V) The replacement of the cabin heating radiator of the Audi A3 is done by opening the glove compartment, unscrewing its internal fixing screws complete…
Disassembly of the Audi A3 heating radiator
Disassembly of the Audi A3 heating radiator
Audi A3 (2012-2019 / MK 3, 8V) Today's main instructions will show us how to disassemble and replace the heater radiator of the Audi A3. First, we get into the cabin and start disa…

Other guides you may be interested in

How to Install an Additional Horn on a Fiat Punto

It may happen that the original horn starts to produce a sound that is noticeably underwhelming; at this point, you can decide to install a pair of sounders connected in parallel with the original one to achieve a more assertive sound. The installation is very easy, but it is important to direct the sound output towards an air intake, so you need to shape a support bracket to fix it to the slam panel with a single bolt. Once secured, take the positive power from the fuse box using a 2.5 mm² cable, tapping into the purple wire directly under the relay while connecting the ground directly to the negative terminal of the battery.

Watch the video!


by ScegliAuto

More videos