Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear seat of the Audi A3.

Model: Audi A3 MK 2, 8P - Years 2003-2013
Part: Seat

Removing the rear seat of an Audi A3 model p8 is a very simple operation, easily performed independently. All you will need is a 13mm Torx key. Go to the back of the car and remove the lower cushions by extracting them, then flip the seat back and remove the plastic cover. Once the cover is removed, unscrew the screw that secures the seat back with the T13 key. After removing the first seat, you can continue with the removal of the others, following the same previous instructions. The installation is a bit more complex as you will need to insert the seat belts, but the steps remain unchanged.

Posted on 15 September 2023 by ScegliAuto

Video tutorial

Related tutorials

How to remove the rear seats of the Audi A3/A4
How to remove the rear seats of the Audi A3/A4
Audi A3 (2012-2019 / MK 3, 8V) Let's see how to remove the rear seats from an Audi A3 or an Audi A4: to remove the rear seat, we must first pull it out from the front edge; on each…
How to remove the rear seat cushion of the Audi A3 8P
How to remove the rear seat cushion of the Audi A3 8P
Audi A3 (2003-2013 / MK 2, 8P) In this video we can see how to remove the rear seat of the Audi A3 8P: this system is valid for all Audis that are more or less this age. There are …
How to Remove the Front Seat on Audi A3
How to Remove the Front Seat on Audi A3
Audi A3 (1996-2003 / MK 1, 8L) Let’s see how to remove the front seat (passenger side) on an Audi A3? This video explains how to proceed. First, move the seat back using the electr…

Other guides you may be interested in

How to Remove the Interior Handle of a BMW 3 Series

Remove the interior handle (right front) on a BMW 3 Series: disconnect the battery terminals, use a screwdriver to remove the screws located in the upper lever area of the door opening and the screws in the handle (after removing the plastic cover). Remove the remaining screws on the door panel and detach the retaining clips. Finally, pull off the panel and disconnect it from the door (unplug the power wiring and the opening cable). Remove the handle from the panel (remove the retaining screws) and reassemble everything.

Watch the video!


by ScegliAuto

More videos