Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Audi
  4. :
  5. Q3
  6. : How to disassemble the sun visor of the Audi Q3.

Audi Q3 - Video tutorial

Model: Audi Q3 F3 - Years 2018-2024
Operation: How to disassemble the sun visor of the Audi Q3.

In this short guide, we will see the main instructions on how to disassemble and replace the sun visor of the Audi Q3, in simple and quick steps. First, we get inside the cabin and start unscrewing the fastening screw of the sun visor hook, then detach it on the other side to remove it permanently. Then, it is explained how to remove the support from the sun visor, as shown in the video. At this point, we reassemble the sun visor, fixing it correctly; then we connect the electrical connector of the mirror light of the sun visor!


Posted on 15 September 2023 by ScegliAuto



How to remove the front handle in the Audi Q3?
Audi Q3 (2018-2024 / F3) In this tutorial, we can see how to disassemble the front handle in the Audi Q3, an extremely simple and fast operation. To do this, we will only nee
How to replace the front headlight bulb of the Audi Q3?
Audi Q3 (2011-2018 / 8U) Today we will see the steps that will allow us to disassemble and replace the front headlight bulb of the Audi Q3. First, we open the engine hood of
Replacement of the timing belt of the Audi Q3 2.0 TDI.
Audi Q3 (2011-2018 / 8U) Through these short and simple steps, we will see how to disassemble and replace the timing belt of the Audi Q3. First, lift the vehicle and start by

    Frequently Asked Questions

    • Q3 2018-2025 - Why traction control in the Audi Q3? Read Answer
    • Q3 2018-2025 - How much does the Audi Q3 service cost? Read Answer
    • Q3 2018-2025 - How much does the Audi Q3 service cost? Read Answer

How do you open the fuel flap of the Volkswagen Golf 5?

In order to open the fuel flap of the Volkswagen Golf 5, you need to press the appropriate button inside the passenger compartment, which is located in the rear part of the glove box on the driver's door. By pressing the button, the flap will unlock and it will then be possible to open it manually. Once the flap has been opened, the fuel tank access cap must be unscrewed. To close everything again, it will be sufficient to screw the tank cap again; subsequently, the flap must also be closed, pressing it so that it fits thanks to its locking mechanism.

Watch the video!


by ScegliAuto

More videos