Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Life in a 2019 Audi A8

Model: Audi A8 Typ4n, MK 4 - Years 2019-2026
Part: Warning light – error code

In this video tutorial, you will see how to reset the oil life in a 2019 Audi A8 by following some simple steps that guide you through proper vehicle maintenance. The first thing you must do before resetting the oil life is to perform maintenance on the vehicle, such as changing the engine oil and filters. After completing the DIY service, get in the car, press the ignition button without starting the engine, and you will see the oil life message on the display (oil change in 25 days). Now, go to the main page, then select vehicle, go to settings, and finally go to maintenance interval and click on reset.

Updated on 18 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Service Reset on an Audi A8
Service Reset on an Audi A8
Audi A8 (2009-2017 / 4H, MK 3, D4) In today's video tutorial, you will learn the procedure to reset the service light on an Audi A8, third generation model. Start the procedure by turn…
Tire pressure reset on an Audi A8
Tire pressure reset on an Audi A8
Audi A8 (2019-2026 / Typ4n, MK 4) In today's video, we can see how to reset the tire pressure warning light on an Audi A8, the latest generation model produced from 2019 onwards. Let'…
How to Reset the Tire Pressure Sensor on Audi A8
How to Reset the Tire Pressure Sensor on Audi A8
Audi A8 (2019-2026 / Typ4n, MK 4) To reset the tire pressure sensor on a new generation Audi A8, produced from 2019 onwards, first verify the correct pressure of each tire as indicate…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos