Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the motor oil of the Audi A3?

Model: Audi A3 MK 3, 8V - Years 2012-2019
Part: Engine oil

In order to replace the engine oil of the Audi A3, you need to loosen the drain plug located in the lower part of the engine compartment: once this plug is loosened, you can ensure that all the used oil is collected inside a properly positioned container. Then, you can open the hood and remove the oil filter located inside the engine compartment: afterwards, you can remove the plug in the central upper part of the engine block in order to add the necessary amount of engine oil for topping up.

Posted on 27 September 2023 by ScegliAuto

Video tutorial

Related tutorials

How to replace the oil filter and engine oil of the Audi A3
How to replace the oil filter and engine oil of the Audi A3
Audi A3 (2003-2013 / MK 2, 8P) Today we will explain how to replace the oil filter and engine oil of the Audi A3 mk2 model. Pull the front hood release lever and open the hood. Rem…
How to Replace the Engine Oil and Filter on an Audi A3
How to Replace the Engine Oil and Filter on an Audi A3
Audi A3 (2012-2019 / MK 3, 8V) How to proceed with the replacement: lift the car on a column lift, remove the engine protection panel and unscrew the oil sump bolt; allow the oil t…
Change oil on Audi A3
Change oil on Audi A3
Audi A3 (2003-2013 / MK 2, 8P) Do we want to replace the engine oil on our Audi A3? Let's see how to replace the oil together with the filter. We lift the car on a pillar or jack b…

Other guides you may be interested in

How to Remove the Steering Wheel from a Citroen C3

How do you remove the steering wheel from a Citroen C3? Before removing the steering wheel, disconnect the battery terminals located in the engine bay. Follow these steps to proceed with the removal: remove the inspection caps at the back of the steering wheel (if present), then, using a socket or screwdriver, undo the screws securing the steering wheel cover (where the airbag is located). Once the airbag (driver's side) is released, disconnect the power connectors and remove it. Using a socket, undo the large central bolt and take the steering wheel off its mount. For reassembly: connect the power connectors, then press the steering wheel with your hands (until it fits into its mount) and subsequently tighten the large bolt.

Watch the video!


by ScegliAuto

More videos