Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Glove Compartment of the Audi A6

Model: Audi A6 C4, MK 1 - Years: 1994, 1995, 1996, 1997
Part: Glove compartment

See other generations:
Video tutorial

Today's instructions will show you the procedure to remove and replace the glove compartment of the Audi A6. First, get inside the vehicle and start by removing the side plastic cover of the dashboard; then unscrew all the mounting screws located under the glove compartment, as shown in the video.

At this point, unscrew the additional internal screws to detach and remove it, disconnecting the small electrical connector of the bulb; repair or replace the glove compartment if necessary, applying the reverse procedure for reinstallation!


Updated on 23 August 2026 by ScegliAuto


Related tutorials

Audi A6 (1997-2004 / MK 2, C5) Hello everyone! Today, I will explain how to remove a glove compartment on an Audi A6. Open the glove compartment and, using an 8 mm wrench, remove t…
Audi A6 (1997-2004 / MK 2, C5) In this video tutorial, you will learn how to remove the glove box of an Audi A6 C5 by following these simple instructions. First, get inside the car…
Audi A6 (2004-2012 / C6, MK 3) To disable the passenger airbag on the Audi A6, open the glove compartment located on the front passenger side. Here, in the upper left housing, you …

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos