Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Glove Compartment on Audi A6 C5

Model: Audi A6 MK 2, C5 - Years 1997-2004
Part: Glove compartment

Hello everyone! Today, I will explain how to remove a glove compartment on an Audi A6. Open the glove compartment and, using an 8 mm wrench, remove the three bolts that secure it at the top. Once done, you will need to get underneath the glove compartment to see the other two bolts that secure it from below. They are located in the two corners under the drawer and are clearly shown in the video. After removing these bolts, you can pull the drawer out and disconnect its rear connectors. Done! For reassembling the new glove compartment, simply reverse the steps.

Updated on 18 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Cabin Air Filter in Audi A6 Avant
Replacing the Cabin Air Filter in Audi A6 Avant
Audi A6 (2004-2012 / MK 3, C6) To replace the cabin air filter in the Audi A6, start by placing the vehicle on a lift or on a flat surface to work safely. After locating the filter…
Procedure to Replace the Cabin Air Filter on Audi A6
Procedure to Replace the Cabin Air Filter on Audi A6
Audi A6 (2004-2012 / MK 3, C6) In this video tutorial, we can see the procedure to replace the cabin air filter on an Audi A6 by following some simple steps: the first thing to do …
How to Remove the Cabin Air Filter in an Audi A6
How to Remove the Cabin Air Filter in an Audi A6
Audi A6 (2004-2012 / MK 3, C6) How to remove the cabin air filter in an Audi A6? You can find the cabin filter in the lower right of the glove compartment. Use a plastic trim tool …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos