Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the License Plate Holder on an Audi A4?

Model: Audi A4 B8 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Checks and maintenance

See other generations:
Video tutorial

To replace the license plate holder on an Audi A4, first loosen the bolts that secure the license plate to its mounting. This will allow you to completely remove the plate.

Once the plate is removed, locate the corresponding license plate holder. Remove it from its mounting by unscrewing the two side screws.

After the screws are removed, you can completely detach the old license plate holder from its position, allowing you to install the new one. Secure the new holder with the appropriate screws.


Updated on 27 August 2026 by ScegliAuto


Related tutorials

How do you replace the license plate light bulb of the Audi A4?
How do you replace the license plate light bulb of the Audi A4?
Audi A4 (2007-2016 / B8) To replace the license plate light bulb of the Audi A4, you need to pry with an object in order to detach the small light fixture located right above…
How to change the battery of an Audi A4 B8
How to change the battery of an Audi A4 B8
Audi A4 (2007-2016 / B8) In this video we can see how to change the battery of an Audi A4 B8: the battery of this vehicle is not located in the engine compartment, but in the…
Replacing Sun Visor on Audi A4
Replacing Sun Visor on Audi A4
Audi A4 (2007-2016 / B8) In this video, you will see how to detach and replace the sun visor and its supports in an Audi A4 B8. The first step is to open the sun visor and de…

    Frequently Asked Questions

    • A4 2004-2008 - Where is the AUX cable socket on the Audi A4? Read answer

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos